T24系列自动复位PPS壳体
    发布时间: 2020-05-22 10:11    

高度12.4mm,适用动作温度范围0-200℃,安装方式均可定制

最通用的自动复位KSD301温控开关/温控器,PPS壳体,适用动作温度范围0-220℃。
The most versatile Automatic Reset KSD301 thermostats.


温度范围广,从低温到高温,可根据客户需求设定动作及复位温度值。
A wide range of temperature,low temperature till high temperature,can be set according to customer requirements.


产品应用:空调,冰箱,热水器,微波炉,电暖器,豆浆机,智能马桶,电吹风,壁炉,干衣机,投影仪,碎纸机、电水壶、塑封机、烤面包机、咖啡机、煎药壶、饮水机等。
APPLICATION:Air conditioner,Refrigerator,Water Heater
            Microwave Ovens,Electric Heater,Soybean Milk Machine
            VALTOO,Hair Drier,Fireplace,Clothes Dryer
            Projector,Shredder,Electric Kettle
            Sealing Machine,Toaster,Coffee Machine
            Decocing Pot,Water Dispencer


帽盖/壳体材质,支架样式/端子角度/端子尺寸均可根据客户需求定制。详情参见底部表格。
Cap/Case material,Bracket type/Terminal Orientation/Terminal Size could be customized based on actual demand. See the bottom for details.


类型:单刀单掷
Type: Single pole - single throw


T24系列温控开关高度:12.4毫米(T23系列是9.6毫米)
T24 series thermoistat Height: 12.4mm(T23 series is 9.6mm)


动作温度设定值范围
Operating temp:
UL/CUL: 0℃~250℃
TUV: 0℃~230℃
CQC: 50℃~250℃


复位区间:8℃或者更多(取决于客户需求)
Differential: 8℃ or more(depend on customer's demand.)


帽盖/支架材质:铝/不锈钢/铜
Cap/Bracket Material: Aluminum/Stainless steel/Copper


端子角度:0°/30°/45°/60°/90°
Terminal Orientation:0°/30°/45°/60°/90°


端子尺寸:4.75毫米(0.187英寸)/6.35mm(0.25英寸)
Terminal Size:4.75mm(0.187inch)/6.35mm(0.25inch)


壳体材质:电木(T)/塑料(P)/陶瓷(C)
Case Material: Phenolic(T)/PPS(P)/Ceramic(C)


电气额定值
Electrical Rating:
16A/250V AC Resistive load
15A/125V AC Resistive load
10A/250V AC Resistive load


温度公差:±3℃或者以上,标准:±3℃~±12℃(取决于客户需求的动作温度值)
Temp Tolerance: ±3℃ or more, Standard: ±3℃~±12℃(depend on customer required operating Temp)


寿命:10万次以上
Endurance: 100,000 cycles or more


内部阻抗:50mΩ以下
Circuit Resistance: 50mΩ or less


绝缘电阻:100MΩ以上(直流500V电压下测试)
Insulation Resistance: 100MΩ or more(DC 500V)
 
耐电压:在上盖与导电端子之间施加1450V交流电一分钟不被击穿(漏电流0.5mA)
Dielectric Strength: AC 1,450V for 1 min.


通用的支架/端子样式和壳体材质有如下表可选择。我们也乐意与客户开发新的设计。
Current bracket/Terminal types and case material options are as below. We would like to cooperate customer for new design.