T23系列自动复位PPS壳体
    发布时间: 2020-05-22 09:56    

高度9.6mm,双臂结构跳板,适用温度范围0~220℃,安装方式可定制

一种KSD301双金属片温控器,相对于业内12mm高度的常规温控器,T23系列温控器高度仅有9.6mm,极大的缩小了安装体积;

端子脚内部有铆接焊锡点胶处理,相比较于常规温控器单纯的物理铆接,有更好的导通性能;

内部的双臂结构跳板也拥有业内单臂折弯跳板无法比拟的性能。

最通用的自动复位KSD301温控开关/温控器

The most versatile Automatic Reset KSD301 thermostats.

温度范围广,从低温到高温,可根据客户需求设定动作及复位温度值。
A wide range of temperature,low temperature till high temperature,can be set according to customer requirements.

产品应用:空调,冰箱,热水器,微波炉,电暖器,豆浆机,智能马桶,电吹风,壁炉,干衣机,投影仪,碎纸机、电水壶、塑封机、烤面包机、咖啡机、煎药壶、饮水机等。
APPLICATION:Air conditioner,Refrigerator,Water Heater
            Microwave Ovens,Electric Heater,Soybean Milk Machine
            VALTOO,Hair Drier,Fireplace,Clothes Dryer
            Projector,Shredder,Electric Kettle
            Sealing Machine,Toaster,Coffee Machine
            Decocing Pot,Water Dispencer

帽盖/壳体材质,支架样式/端子角度/端子尺寸均可根据客户需求定制。详情参见底部表格。
Cap/Case material,Bracket type/Terminal Orientation/Terminal Size could be customized based on actual demand. See the bottom for details.

类型:单刀单掷
Type: Single pole - single throw

T23系列温控开关高度:9.6毫米(T24系列是12.4毫米)
T23 series thermoistat height: 12.4mm(T24 series is 12.4mm)

动作温度设定值范围
Operating temp:
UL/CUL: 50℃~220℃
VDE: 0℃~180℃
CQC: 50℃~180℃

复位区间:8℃或者更多(取决于客户需求)
Differential: 8℃ or more(depend on customer's demand.)

帽盖/支架材质:铝/不锈钢/铜
Cap/Bracket Material: Aluminum/Stainless steel/Copper

端子角度:0°/30°/45°/60°/90°
Terminal Orientation:0°/30°/45°/60°/90°

端子尺寸:4.75毫米(0.187英寸)/6.35mm(0.25英寸)
Terminal Size:4.75mm(0.187inch)/6.35mm(0.25inch)

壳体材质:塑料(P)
Case Material: PPS(P)

电气额定值
Electrical Rating:
16A/250V AC Resistive load
15A/125V AC Resistive load
10A/250V AC Resistive load

温度公差:±3℃或者以上,标准:±3℃~±12℃(取决于客户需求的动作温度值)
Temp Tolerance: ±3℃ or more, Standard: ±3℃~±12℃(depend on customer required operating Temp)

寿命:10万次以上
Endurance: 100,000 cycles or more

内部阻抗:50mΩ以下
Circuit Resistance: 50mΩ or less

绝缘电阻:100MΩ以上(直流500V电压下测试)
Insulation Resistance: 100MΩ or more(DC 500V)
 
耐电压:在上盖与导电端子之间施加1450V交流电一分钟不被击穿(漏电流0.5mA)
Dielectric Strength: AC 1,450V for 1 min.

通用的支架/端子样式和壳体材质有如下表可选择。我们也乐意与客户开发新的设计。
Current bracket/Terminal types and case material options are as below. We would like to cooperate customer for new design.